If you feel that the Inline 800 is putting down either too much or too little powder before the system pulls the media through the oven when in Automatic mode, the solution is to calibrate the Powder Weight Sensor on the system.
Firstly, access the calibration screen by selecting to view the "IO" Menu, then select "?" to view the monitoring notes. Then select "Next" 3 times to get to the final page of monitoring notes. From this page, tap the top right corner of the screen and a password entry box will appear.
Input the password "1234" and press "Enter" to confirm.
You'll now have access to the Calibration screen. To resolve powdering amount issues, perform the "Weight" calibration.
With no film or powder in the system, select "Initial" in the weight calibration. Then open the powder tray cover and push down the powder weight trough. Whilst holding this down with one hand, use the other hand to select "Lowest". Push the trough further down if you desire more powder to be dropped before the media will be pulled through the oven . And push the powder trough less distance down if you require less powder to be dropped before the media will be pulled through the oven.
Then press "Back" until you're back at the home screen.
Please see view the following YouTube video for a video explanation of the process:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article